Omega-engineering IOP-241 Bedienungsanleitung PDF herunterladen (Seite 19)

2.2.3.3 Card and Socket Services Software

In order to use the IOP-241 Enabler for DOS, the system MUST NOT be configured with Card

and Socket Services software. If Card and Socket Services software is installed, the IOP-241

Enabler may interfere with its operation and with the device(s) it controls. For systems

configured with Card and Socket Services, the IOP-241 Client Driver is the recommended

method of configuration.

2.3 After Completing Configuration

The IOP-241 is now configured and ready for use. Depending on the type of application

software to be used, the user may wish to review one or more of the following:

1. Chapter 4 of this document provides a basic theory of operation of the card for users

that wish to learn the technical details about the operation of the IOP-241.

2. For users that want to program the IOP-241 with direct I/O transfers to the card’s

I/O register.

3. Users that wish to write custom application software without programming the

IOP-241 directly should consult the DAQDRIVE software reference manual.

DAQDRIVE provides a library of data acquisition subroutines and is included free

of charge with the IOP-241.

4. For third party data acquisition software such as LabTech Notebook®, LabVIEW®,

TestPoint® or SnapMaster®, consult the documentation provided by the software

manufacturer.

IOP-241 Users Manual 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Keine Kommentare

Omega-engineering IOP-241 Bedienungsanleitung Seite 19